Notes on installation of metal tube rotameter:

Notes on installation of metal tube rotameter:

1) Installed vertically on a non-vibrating pipeline, the fluid flows through the instrument from bottom to top.
2) A filter should be installed upstream of the meter when measuring dirty fluids
3) If the fluid itself has pulsation, a buffer tank can be installed; if the instrument itself has vibration, a damping device can be installed.
4) To exhaust the liquid, use the gas in the meter.
5) When the fluid density, gas pressure and temperature of the operating conditions are not consistent with the calibration, necessary conversions must be made.


Pre:Advantages of 80G Radar Level Meter
Next:Calibration methods for vortex flow meters: