• [alt2]
  • circle
  • electrode

Union Connection Electromagnetic Flow Meter

  • Size:DN10~DN300
  • Output Mode:4~20 mA,pulse
  • Electrode:SS316L,HC,HB,Tan,Ti,Pt
  • Working Pressure:6.3、10、16、25、32MPa
  • Connection :Union
Share With:
  • Overview
  • Technical Data
  • Inquiry
Sanitary flow meter works based on Faraday's law, and measure conductive medium with conductivity more than 5 μs/cm and flow range from 0.2 to 15 m/s.
Union electromagnetic flow meter is sonsist of proprietary technological sensor and transmitter,it's mainly used to measure  slurry,cement paste and high pressure water infusion  in geology, oil exploration.

According customers requirements,we can provide various electromagnetic flowmeters widely used following industries,

      • Chemical
       Iron and steel
      • Water supply
      • Electricpower
      • Water treatment

      • No moving partes,no pressure loss
       Accuracy:±0.2% of the measured value + 0.3m/s
      • High accuracy for low flor rate and can measure duplex flow
      • Double frequency excitation,stable zero point 
       Built-in ground electrode,no need grounding ring


          Installation Notice

Installed at the lowest point and vertical upward direction              Install exhaust valve at the downstreat of flow meter

Don’t install at the highest point and vertical downward diection          when drop is more than 5m

Installed at the lowest point when used in open drain pipe        Need 10D of upstreat and 5D of downstreat


Dont’ install it at the entrance of pump, install it at the           Installed at the rising direction
exit of pump




 Union Connection Electromagnetic Flow Meter Parameter
Size DN10-DN300
Accuracy 0.5% of the read value,0.3% and 0.2% optional
Liner Material F46, PFA, PU
Electrode SS316L, HC, HB, TI, Tan, Pt
Working Pressure 6.3, 10, 16, 25, 32 MPa
Medium Temperature 0~180
环境温度 -20~60
Connection Union
Protection Grade IP65, IP68
Explosion-proof Mark ExmIIT4ExmdIIBT4

Main performances of the electrode materials
Electrode material Applications
sainless steel SUS316 Applicable in water,sewage and corrosive mediums.
Widely used in industries of petrol,chemistry,carbamide,etc

Stainless steel covered

with tungsten carbide

Applicable in mediums of no corrosive and low abrasion.
Hastelloy B(HB) Having strong resistance to hydrochloric acid of any consistance which
 is below bioling piont.
Also resistable against vitriol,phosphate,
hydrofluoricacid,organic acid etc which are oxidable acid,alkali and 
non-oxidable salt.
Hastelloy C(HC) Be resistant to oxidable acid such as nitric acid,mixed acid
as well as oxidable salt such as Fe+++,Cu++aStnd sea water

Applicable in seawater,and kinds of chloride,hypochlorite salt,oxidable
acid (including fuming nitric acid),organic acid,alkali etc.

Not resistant to a pure reducing acid(such as sulphuric acid,hydrochloric 
acid   corrosion.

But if acid contains antioxidant is greatly reduce corrosion.
Tantalum Having strong resistance to corrosive mediums that is similar with glass
Almost is applicable to all chemical mediums.
Except for hydrofluoric acid,oleum and alkali.
Platinum-iridium Almost be applicable in all chemical mediums except for ammonium salt.
Inquiry >>