Your position: Home > Product > Ultrasonic Flowmeter

  • [alt2]
  • integral-display-flange-ultrasonic-flow-meter
  • integral-display-flange-ultrasonic-flow-meter
  • integral-display-flange-ultrasonic-flow-meter

Integral display flange ultrasonic flow meter

  • Size::DN15~DN6000mm
  • Accuracy::Better than±1.0%
  • Output::4-20mA,Pulse,RS485 MODBUS RTU
  • Body material::DN15~DN32 is SS304 Above , DN32 is carbon steel,SS304 is optional
Share With:
  • Overview
  • Technical Data
  • Inquiry
 

Introduction:

Flange ultraosnic flow meter is one kind of economy liquid flow meter which mainly measure various of pure liquid,such as:Clean water,Sea water,Dringking water,River water,Alcohol etc.

And it is suitable for continuously measuring flow and heat of clean and uniform liquids without large concentration suspended particles or gases industrial environment.

Advantage:

Accuracy better than ±1.0%
High reliability, high performance, low price
Bi-directional flow measurement
No moving parts, no wear, no pressure loss,Maintenance-free 
Measuring conductivity liquid and Non-conductivity liquid
Display instantaneous flow,Total flow,Heat,Positive flow,Negative flow
High-precision machined pipe sections, the sensor is installed before leaving the factory to ensure high measurement accuracy


Installation:

Generally, the following principles should be followed:

* To select a pipe section filled with fluid, such as a vertical part of the pipeline or a horizontal pipe section filled with fluid.

* The measuring point should be 10 times the diameter from the upstream and the straight pipe section within 5 times the diameter from the downstream, and the distance from the valve outlet should be as far as possible.


 

* Ensure the temperature at the measuring point is within the working range. 

* Fully consider the fouling condition of the inner wall of the pipe, and try to select a non-scaling pipe section for measurement. When it cannot be satisfied, fouling should be considered as a lining for better measurement accuracy. 

* select pipe sections with uniform and dense pipes that are easy for ultrasonic transmission.

Please refer to the two examples on the right for the selection of measuring points. 


 

Technical Data:

 

Description Specifications
Size
 DN15~DN6000
Accuracy Better than ±1.0%
Velocity range 0~±10m/s
Liquid temperature 0~160℃
Liquid Type Water, sea water, waste water, alcohol, beer, various kinds of oil etc which can conduct ultrasound single uniform liquid
Pipe material 

Steel, stainless steel, cast iron, copper, PVC, aluminum, FRP etc, all kinds Of

dense pipeline, can be liner inside 

Output signal

1 channel 4-20mA output, inpedence 0-1K

1 channel OCT pulse output, pulse width 6-1000ms, (default is 200ms) 

1 channel relay output

Input Signal 4-20mA input

Connect with three wire PT100, can achieve heat measurement

Communication RS485 MODBUS RTU
Power supply DC8-36V or  AC85-264V
Protection   IP65
Power Consumption 1.5W


Water temperature and sound speed table:

 

Temperature(℃ )

Sound speed (m/s)

Temperature(℃)

Sound speed (m/s)

0

1403

50

1541

5

1427

55

1546.5

10

1447

60

1552

15

1464

65

1553.5

20

1481

70

1555

25

1494

75

1555

30

1507

80

1555

35

1516.5

85

1552.5

40

1526

90

1550

45

1533.5

95

1547

   

100

1543


Ultrasonic flow meter model selection:

 

Size

DN15~DN6000

15~6000

       

Body Material

Carbon steel

C

       

SS304

S0

SS316

S1

Pressure Rate

0.6 Mpa

P1

1.0 MPa

P2

1.6 MPa 

P3

2.5 MPa 

P4

Other special

P5

Output

4-20mA,Pulse,OCT,RS485

O

Structure

Integral

I

Remote

R

Connection

Thread

T

Flange

F

 

Inquiry >>

Guess you like