• [alt2]
  • circle
  • liner
  • electrode

Battery Powered Electromagnetic Flow Meter

  • Size:DN3-DN3000
  • Electrode:SS316,HC,HB,Ti,Tan,Pt
  • Liner Material:PTFE,PFA,FEP,neoprene,hard rubber
  • Accuracy:0.5% of reading value, 0.3% and 0.2% optional
  • Connection :Flange,Tri-clamp, Wafer, Union,
Share With:
  • Overview
  • Technical Data
  • Inquiry

Introduction 

Battery-powered Electromagnetic flow meter is hallmarked by its high performance and reliability based on successful, field-proven technology. It is being widely used in industries such as petroleum, chemical engineering, iron and steel, food, electricpower, paper making, water treatment, petrochemical, medicine etc.

Features

  ♦  Medium temperature can be -20℃~200℃.
  ♦  Integrated vertification,diagnostic function and empty pipe detection.

  ♦  Measure forward and reverse direction flows.
  ♦  Built-in reference electrodes,no need to connect ground ring.
  ♦  Dual frequency excitation and stable zero point.
  ♦  Precision coil winding technology,makes magnetic field more uniform.
  ♦  High protection grade,IP65.
  ♦  No moving parts,no pressure loss.
  ♦  High accuracy: ±0.5% of reading,±0.3% and ±0.2% optional,velocity >0.3 m/s.


Application

   ♦ Chemical
   ♦ Medicine
    Beverage
   ♦ Iron and steel
   ♦ Water supply
   ♦ Electricpower
   ♦ Water treatment


 

                                                                                                          Installation Notice

Installed at the lowest point and vertical upward direction              Install exhaust valve at the downstreat of flow meter

Don’t install at the highest point and vertical downward diection          when drop is more than 5m



           
Installed at the lowest point when used in open drain pipe        Need 10D of upstreat and 5D of downstreat



     


Dont’ install it at the entrance of pump, install it at the           Installed at the rising direction
exit of pump



 

 


 

certificate






Sel              Battery-powered Magnetic Flow Meter

Size                    

DN10-DN800mm  (3/8”~32”)        

Accuracy                       

±0.5% of reading,velocity >0.3 m/s  

Conductivity

Normal liquid >5 μS/cm,DI water >20 μS/cm             

Velocity      

0.1-15 m/s

Protection Grade                               

IP68

Power Supply                                     

Battery-powered

Power Consumption                                                   

<20W    

Signal Output      

4~20 mA,pulse

Communication           

RS485/Modbus,GPRS

Language                                        

English,Chinese (Other languages can be provided on request)   

Ambient Temperature                                              

-25 ~ +60  /-77 ~ 140 Sensor      -10~ +50 /-50~122 Convertor

Liquid Temperature

Integrated: 70/ 158 max    Seperated: 200/ 392max

Relative Humidity    

5%~90%

Measuring Tube      

Stainless Steel 304

Electrode Type  

Fixed, Scraper

Flange          

Carbon Steel (standard)
Stainless Steel 304
Stainless Steel 316

Straight Pipe     

Inlet Path ≥ 10D,  Outlet Path ≥ 5D

Excitation Frequency

4.63Hz/s (mode 1), 3.90Hz/s

Electrode    

SS316L (standard), Hastelloy C, Hastelloy B,Titanium Tantalum,
Platinoiridium,Stainless Steel Covered Tungsten carbide       

Liner Material   

PTFE   DN15-DN1600      -20 ~ +120      -68~ 248℉)
PFA    DN3-DN800        -20 ~ +120      -68~ 248℉)
F46     DN25-DN1800      -20 ~ +120     -68~ 248℉)
Neoprene   DN40-DN3000   -10 ~ + 80    -50~ 176℉)
Polyurethane  DN40-DN1600  -10 ~ + 60  -50~ 140℉)
FLS  DN40-DN1800          -10 ~ + 200    -50~ 392℉)

Pressure Rating 

4.0 MPa (DN3-DN150)  
1.6 MPa (DN200-DN600)     
1.0 MPa (DN700-DN1000)
0.6 MPa (DN1200-DN3000)

Flange Standard

ANSI B16.5 150#, 300#, 600#
EN1092-1   PN10,PN16,PN25,PN40
JIS B2220   10K, 20K, 40K

Certificates        

CE 6022120716, ISO9001:2008, CQC1500155689521




Battery-powered Magnetic Flow Meter Selection Table

Model

QTLD Bmag S1-P1-L1-E1-B1-F1-X1-C1-D1

Structure

Integrated

S1

 

 

 

 

 

 

 

 

Seperated

S2

Nominal
Pressure

0.6MPa

P1

1.0MPa

P2

1.6MPa

P3

4.0MPa

P4

Liner   
Material

PTFE  DN15-DN1600  -20 ~ 120

L1

PFA  DN3-DN800   -20 ~ +120

L2

F46  DN25-DN1800   -20 ~ +120

L3

Neoprene  DN40-DN3000  -10 ~ + 80

L4

Polyurethane  DN40-DN1600  -10 ~ + 60

L5

FLS  DN40-DN1800      -10 ~ + 200

L6

Electrode
Material

Stainless steel 316L

E1

Hastelloy B

E2

Hastelloy C

E3

Titanium

E4

Platinum-iridium

E5

Tantalum

E6

Stainless steel covered with tungsten carbide

E7

Body Material

Carbon Steel

B1

Stainless steel 304

B2

Stainless steel 316L

B3

Flange Standard

ANSI 150#, 300#, 600#

F1

JIS 10K, 20K, 40K

F2

DIN PN10,PN16,PN25,PN40

F3

Commnunication

RS485-Modbus

X1

GPRS

X2

Connection

Flange

C1

Thread

C2

Tri-clamp

C3

Wafer

C4

Electrode Type

Fixed

D1

Scraper

D2

 

 

Performance of Electrodes

Electrode Material

Applications

Stainless Steel 316L

Applicable in water,sewage and corrosive mediums.Widely used in industries of petrol,chemistry,carbamide,etc

Hastelloy B (HB)

Having strong resistance to hydrochloric acid of any consistance which  is below bioling piont.
Also resistable against vitriol,phosphate,hydrofluoricacid,organic acid etc which are oxidable acid,alkali and non-oxidable salt.

Hastelloy C (HC)

Be resistant to oxidable acid such as nitric acid,mixed acid,as well as oxidable salt such as Fe+++,Cu++aStnd sea water

Titanium

Applicable in seawater,and kinds of chloride,hypochlorite salt,oxidable acid (including fuming nitric acid),organic acid,alkali etc.
Not resistant to a pure reducing acid(such as sulphuric acid,hydrochloric acid  corrosion.
But if acid contains antioxidant is greatly reduce corrosion.

Tantalum

Having strong resistance to corrosive mediums that is similar with glass
Almost is applicable to all chemical mediums.
Except for hydrofluoric acid,oleum and alkali.

Platinum-iridium

Almost be applicable in all chemical mediums except for ammonium salt.

Stainless Steel Covered
Tungsten Carbide

Applicable in mediums of no corrosive and low abrasion.

 

Inquiry >>