What should be paid attention to during the installation of the radar level gauge?

2021-12-03
 What should be paid attention to during the installation of the radar level gauge?

The heavy liquid level is too heavy. During the installation process-we must consider various installation precautions. The temperature and pressure adaptability of the radar level gauge is relatively good, and it will not be affected by the medium or the medium during the measurement. Is the effect of volatility,
Because the original energy of the product is relatively low, it can work normally in the industrial frequency range without any harm to the human body and the environment.
What are the installation requirements for radar level gauges? What should be paid attention to during installation?
1. What are the installation requirements for the radar level gauge?
During the installation of the radar level gauge, the installation position must be carefully determined.-It must be installed at a distance of more than 200 mm from the container. The installation distance of the entire device should be about 1/6 of the distance between the containers. When the equipment is being installed,
Never install the entire device above the water inlet pipe or in the center of the entire container. Otherwise, this equipment may receive a variety of different false echoes, which can interfere with the reception of normal signals.
2. Pay attention to the low wave speed
When the radar level gauge is actually installed, all wave speeds should reach a lower point, because if it is a concave-convex type container or a cone-shaped container, pay attention to the position of the lower point of the entire product during use. If the liquid level
If the setting is lower than this point, the measurement cannot be performed. Therefore, please adjust the position of the lower point as much as possible. Only in this way can the accuracy of the measurement result be ensured.
How about the positive and negative directions of the heavy liquid level? So far, this equipment has more installation guarantees during the actual installation process, but when using this product, you must also pay attention to the dielectric of the measured medium. constant.

share:

Pre:The requirements and precautions of the precession vortex flow meter when measuring natural gas
Next:Back To List