Your position: Home > News

Tips On Insertion Magnetic Flow Meter Installation

2020-03-30
Q&T insertion magnetic flow meter is an economical alternative to full bore magnetic flow meter.  Widely used for water, waste water,
tap water etc, especially for large pipes more than DN500mm pipe use. With high accuracy of 1.5% accuracy and hot-tapping structure
easy for installation. 

Tips On Insertion Magnetic Flow Meter Installation as below:
1. Installation location must be ensure that the pipeline is always full of measured  fluid.
2. Choose fluid flow pulse small place, that is to say it should stay away from pumps and valves, elbows etc parts of local resistance.
3. When measuring the two-phase fluid (solid, liquid or gas, liquid) flow, it should choose a place that is hard to cause phase separation.
4. Avoid the measuring parts appearing negative pressure.
5. The measuring pipe diameter or circumference is easy to measure and the ovality should be small.



share:

Pre:ACCURACY UP TO 0.5% DN200 GAS TURBINE FLOW METER
Next:How To Achieve Fast Installation For Ultrasonic Flow Meter