Installation precautions of explosion-proof electromagnetic flowmeter

2019-12-18
 Installation precautions of explosion-proof electromagnetic flowmeter
 
Precautions when installing explosion-proof electromagnetic flowmeters for mining
 
1. Axis of the non-measuring electrode must be approximately horizontal;
 
2. Measuring pipe must be completely filled with liquid;
 
3. There must be at least 5 * D (D is the inside diameter of the flowmeter) straight pipe section
    in front of the flowmeter, and at least 3 * D (D is the inside diameter of the flowmeter) length straight pipe section at the rear;
 
4. The direction of fluid flow is the same as the arrow direction of the flow meter;
 
5. A vacuum in the pipeline will damage the lining of the flowmeter, so special attention should be paid;
 
6. There should be no strong electromagnetic field near the flowmeter;
 
7. There should be ample space near the flow meter for installation and maintenance.
 
Q&T Instrument has been producing electromagnetic flowmeters for many years. If you have any problems
during the selection, installation, use and maintenance of electromagnetic flowmeters, contact with us,please
 

share:

Pre:How to choose a electromagnetic flowmeter for sulfuric acid
Next:Back To List