Your position: Home > News

Installation of Vortex Flow Meter

2020-12-02
 Installation of Vortex Flow Meter

1. For high-temperature steam flow meters, the environmental conditions must meet the requirements during the installation process, so indoor and outdoor, only if they meet the environmental requirements.

2. In the process of high-temperature steam flow meter installation, the high-temperature steam flow sensor must be installed on a vertical surface, or on a pipe that is skewed (the flow of fluid flows from the bottom up) to its nominal diameter.

3. The device should be prevented from being installed on the pipeline with certain machine vibration.

4. Its location should prevent the device from being disturbed by strong electromagnetic fields.

5. In the process of high-temperature steam flow meter installation, its occasion should be protected from heat radiation and corrosive gas.

6. If the measured medium contains more impurities, the low-temperature steam flow meter should be equipped with a filter beyond the length of the straight pipe downstream of the sensor.



share:

Pre:Important Things Should Be Payed Attention When Use Electromagnetic Flow Meter to Measure Brine
Next: Analysis of Common Failure of Vortex Flowmeter