How to use data logger in portable ultrasonic flow meter?

2019-04-06
 Q&T QTDS Portable ultrasonic flow meter has a space of 24K bytes of memory, which will hold about 2000 lines of data.

 Please check below methods to do the setting:

  • User M50 to turn on the logger and for the selection for the items that is going to be logged.
  • Use M51 for the times when the logging begins and at how long an interval sustains and how long the data logging will last.
  • Use M52 for the direction of logging data. The default setting will permit the logging data to be stored in the logger buffer.
  • Logging data can be redirected to the RS232C interface without being stored into the logger buffer.
  • Use M53 to view the data in the logger buffer.
Q&T Instrument can provide u with the good product with strong technical support. 




share:

Pre:Portable Ultrasonic Flow Meter Installation Common Trouble Shooting
Next:Back To List