How To Maintain Electrodes of Electromagnetic Flow Meters?

2020-10-16
How To Maintain Electrodes of Electromagnetic Flow Meters?


 The "electrode" plays a very important role in the entire structure of the electromagnetic flowmeter. If the electrode is corroded or some other failure occurs, the intelligent electromagnetic flowmeter will not work properly, so the maintenance of the electrode is also very important. drop
 
1. Before using the electromagnetic flowmeter, first use the standard PH solution to calibrate the electromagnetic flowmeter. After calibration, you need to pay attention to cleaning the electrode with distilled water, and then use the measured medium to clean it once again. Better effect
 
2. If the intelligent electromagnetic flowmeter is not in use due to factory adjustments or other factors, the electrode of the intelligent electromagnetic flowmeter needs to be removed. Don't let the electrode touch during the process of removing the electrode or during storage. The electrode is damaged by a hard object, otherwise the damage will affect the measurement accuracy in the future
 
3. After the smart electromagnetic flowmeter is used, put some solution in it, as long as the electrode ball is completely soaked, but remember not to soak the electrode in distilled water
 
4. The electrode of the intelligent electromagnetic flowmeter should be kept clean and not short-circuited on both sides, otherwise the measurement accuracy will decrease.


share:

Pre:How to Eliminate the Noise of Electromagnetic Flow Meter?
Next:Back To List