Your position: Home > News

Electromagnetic Flowmeter Installation Notice

2022-06-01
 Electromagnetic Flowmeter Installation Notice
 
1. Try to avoid ferromagnetic objects and equipment with strong magnetic fields (such as large motors, large transformers, etc.)
2. Try to install it in a dry and ventilated place, it is not suitable to install it in a place that is humid and prone to water accumulation
3. Avoid sun and rain as much as possible, avoid ambient temperature higher than 60°C and relative humidity higher than 95%
4. The flowmeter should be installed at the back end of the pump, never at the suction side; the valve should be installed on the downstream side of the flowmeter


share:

Pre:Electromagnetic Flowmeter Features
Next:LPG GAS FLOW METER